SDR Cape for BeagleBone

In the old days if you wanted to listen to shortwave you had to turn a dial. Later, you might have been able to tap in a frequency with a keypad. With modern software-defined radio (and the right hardware) you can just listen to the entire high-frequency spectrum at one time. That’s the idea behind KiwiSDR, an open source daughterboard (ok, cape) for the BeagleBone.

The front end covers 10 kHz to 30 MHz and has a 14-bit converter operating at 65 MHz. There is a Xilinx Artix-7 A35 FPGA onboard and a GPS, too. The design is open source and on GitHub.

The interface uses the OpenWebRX project for a powerful HTML 5 interface. You can see a video of its operation below or, if you can get one of the four available slots, you can listen online. From a network point of view, the demo station in Canada worked best for us. However, there are also stations in New Zealand and Sweden.

Reading a huge swath of spectrum at once is a different approach from the trunked radio SDR we covered earlier this month. That project used multiple SDRs to divide a wide band into easy-to-process slices. You could use a KiwiSDR to replace a pan adapter and never have to worry about tuning it.

Thanks [Mike] for the tip.

Filed under: radio hacks